Jackoboard Wet Room Waterproofing Tanking Sealing Kit
SKU : 5004450
You May Also Need
Selection Subtotal:
£85.00
Everything required to tank (waterproof) a wet room prior to tiling.
The Jackoboard tanking kit contains a rapid drying, brush/roller applied, single part flexible liquid membrane for use on rigid surfaces in bathrooms, wetrooms and showers. It can also be used to waterproof existing surfaces such as plaster, plasterboard or timber.
Suitable for all flat or vertical surfaces made of any material. Simple to use for novices and experts alike.
Compatible with almost every type of under floor heating and ready for tiling with no further preparation (please check with under floor heating manufacturer).
For use under ceramic coverings in wet rooms, showers and bathrooms.
Per kit coverage 5 - 6sqm under normal conditions with recommended two coats.
Tub Containing:
4kg (2.5 litre) Tanking solution
1 litre primer for timber/plasterboard
10m sealing tape
2 x internal corners seals
- Waterproof, protects moisture-sensitive substrates.
- Flexible, compensates tensions, deformations of the substrate, variations in temperature and vibrations.
- Crack-bridging, high security even with subsequent cracks in the substrate.
- Ready-to-use, easy to apply by roller, brush or trowel.
- Two-coloured, for easier visual control of the layer thickness.
- Resistant to lime water, ensures bonding between protective coating and mortar if the adhesive bed is constantly submerged in water.
Liquid area waterproofing to be applied by roller, brush or trowel.
For indoor use. For walls and floors.
Application undiluted to the substrate by roller, brush or trowel.
For wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, care homes and hospitals.
On moisture-sensitive, absorbent substrates, e.g. plasters, plaster slabs, gypsum fibre boards, plaster boards, wooden chipboards, anhydrite screeds in moist and wet areas subject to usual domestic use.
On absorbent mineral substrates, e.g. concrete, screed, render, aerated concrete, cementitious levelling compounds for walls such etc.
Everything required to tank (waterproof) a wet room prior to tiling.
The Jackoboard tanking kit contains a rapid drying, brush/roller applied, single part flexible liquid membrane for use on rigid surfaces in bathrooms, wetrooms and showers. It can also be used to waterproof existing surfaces such as plaster, plasterboard or timber.
Suitable for all flat or vertical surfaces made of any material. Simple to use for novices and experts alike.
Compatible with almost every type of under floor heating and ready for tiling with no further preparation (please check with under floor heating manufacturer).
For use under ceramic coverings in wet rooms, showers and bathrooms.
Per kit coverage 5 - 6sqm under normal conditions with recommended two coats.
Tub Containing:
4kg (2.5 litre) Tanking solution
1 litre primer for timber/plasterboard
10m sealing tape
2 x internal corners seals
- Waterproof, protects moisture-sensitive substrates.
- Flexible, compensates tensions, deformations of the substrate, variations in temperature and vibrations.
- Crack-bridging, high security even with subsequent cracks in the substrate.
- Ready-to-use, easy to apply by roller, brush or trowel.
- Two-coloured, for easier visual control of the layer thickness.
- Resistant to lime water, ensures bonding between protective coating and mortar if the adhesive bed is constantly submerged in water.
Liquid area waterproofing to be applied by roller, brush or trowel.
For indoor use. For walls and floors.
Application undiluted to the substrate by roller, brush or trowel.
For wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, care homes and hospitals.
On moisture-sensitive, absorbent substrates, e.g. plasters, plaster slabs, gypsum fibre boards, plaster boards, wooden chipboards, anhydrite screeds in moist and wet areas subject to usual domestic use.
On absorbent mineral substrates, e.g. concrete, screed, render, aerated concrete, cementitious levelling compounds for walls such etc.
Jackoboard
JACKOBOARD® are one of the leading manufacturers of XPS (extruded polystyrene foam) solutions offering a wide range of XPS foam insulation boards, wet room trays and building board solutions.
Designed & manufactured in Germany, market leading JACKOBOARD® Plano construction boards, building system and wet room trays are water-repellent and easy to work with. Finished with a special coating, they are ready to be tiled, rendered or plastered.
Explore the complete JACKOBOARD® building system range today: